Piko 56500 - Dekoder jazdy i oświetlenia PluX22 PIKO SmartDecoder XP 5.1 MFX

Piko 56500 - Dekoder jazdy i oświetlenia PluX22 PIKO SmartDecoder XP 5.1 MFX

Nowy
56500
249,00 zł
Brutto
Zapytaj o możliwość zamówienia
Nowość 2022 - przedsprzedaż, przyjmujemy zamówienia

 

Polityka bezpieczeństwa

 

Zasady dostawy i zwrotów

offer-banner1.jpg
right-banner1.jpg

Dekoder pasuje do lokomotyw z gniazdem PluX22 22-pin, takich jak np:

  • Piko EU07/EU06/EP08/EP07
  • Piko ET41
  • Piko ET21
  • Piko ET22
  • Piko SU46
  • Piko SU45/SP45
  • Piko BR232 (rok produkcji od 2018)
  • Roco EU44 (rok produkcji od 2018)
  • Roco ST44 (rok produkcji od 2018)

PIKO SmartDecoder 5.1 PluX22 to wieloprotokołowy dekoder najnowszej generacji z funkcją mfx i różnymi wyjściami oświetlenia oraz sterownikiem silnika 1,2 A. PIKO SmartDecoder 5.1 obsługuje formaty danych DCC z Rail-ComPlus®, Selectrix®, Motorola® (z obsługą mfx) i może być również używany w systemach analogowych. SmartDecoder automatycznie rozpoznaje odpowiedni tryb pracy. Można wywołać do 44 przełączalnych funkcji dodatkowych.

Charakterystyka

• W pełni automatyczne rozpoznawanie trybów pracy
• Tryby pracy DCC, MM, Sx, z obsługą mfx, AC, DC
• Prąd silnika ciągły 1,2A
• Prąd szczytowy silnika 2,0 A
• 7 dodatkowych wyjść funkcji specjalnych
• Całkowity prąd wyjść funkcyjnych 0,4A
• Mapowanie funkcji do F44
• Tryb manewrowy
• Programowalne charakterystyki silnika
• Tryby hamowania na torze
• Zabezpieczenie przed zwarciem i przegrzaniem
• Wymiary: 22x15x3.8mm

-------------

NOTE: Detailed information on the PIKO SmartDecoder XP 5.1 is available as a PDF file on our Webshop on the page of the respective item number. The file contains a full description of all functions and operating possibilities for the new SmartDecoder XP 5.1.


Description

The state-of-the-art PIKO SmartDecoder XP 5.1 inside in this PIKO locomotive is a compact yet powerful multi-protocol
PluX22 decoder. It complies with the current RCN standards in all areas and can be used in DCC, mfx® and Motorola®
digital systems. The decoder can be used on DC or AC analog layouts. It automatically senses what operating mode
is used on your layout and is RailCom®/RailCom Plus® compatible. The SmartDecoder XP 5.1 features several
programmable braking distance functions in addition to numerous other programmable functions.
The PIKO SmartDecoder XP5.1 Sound is load-regulated and features auto-adaptive motor control that works with of
a fundamentally newly developed traditional DC motors for a silky smooth ride as well as 1.2 Amp coreless motors.
The decoder will also tolerate a temporary current draw up to 2 Amps. The motor speed table can be set using the
minimum, median, and maximum motor speed (simple curve), or by the user-programable 28-speed step extended
curve. The decoder features two directional lighting outputs and seven additional special function outputs that can be
activated using function keys up to F68 (DCC). The switching (shunting) gear, with extended slow speed range, the
three possible starting and braking delays, as well as the many vehicle sounds are also switchable via function keys.
The sound of a suitable SUSI sound module can control specified function outputs as well as the motor output of the
decoder. For example, the lighting of a diesel locomotive flickers when the engine is started. The PIKO SmartDecoder
XP 5.1 is supported by the further developed power management in case of short-term voltage loss.

Installing the PIKO SmartDecoder XP 5.1

Remove the jumper plug from your model’s PluX22 interface. Insert the new decoder into the interface socket. Note that
PIN 11 is missing on the new decoder. Check for crossed wires and short circuits before and after reinstalling the shell.
Place the model on your programming track with programming mode activated on your DCC system. During programming
or when reading the model’s DCC address, a small amount of current will flow through the model, which does not affect
the decoder; even in the event of a short circuit.

Special functions A1 to A7

The decoder’s special function outputs A1 to A7 can only be activated if the desired functions are already connected to
the model’s PluX22 interface or if solder pads are available for the special function outputs on the main circuit board.

SUSI interface

The decoder’s SUSI interface is controlled by the PluX22 interface. If the main circuit board of the model is equipped
with a SUSI interface, you can either use a PIKO sound module with SUSI or a suitable single-function decoder. You
can find which CV should be programmed for its respective function output in the operating instructions. The decoder
is factory set to send data to the PIKO sound module via the SUSI interface.

CAUTION: Soldering the decoder itself should only be done by experienced DCC professionals using appropriate
equipment. Decoders damaged by improper handling are not covered by the warranty.

First-time use of the decoder (state of delivery)

Enter address 3 on your DCC control system. Depending on your DCC system‘s data format, the decoder will
operate using 28 speed steps or in Motorola® mode. When using a RailCom Plus®-enabled DCC system or with
an mfx®-capable system, the decoder is recognized in a few seconds and can be operated immediately. If the
decoder is used on a conventional analog layout, it can be controlled with a DC or AC power pack. The decoder will
automatically detect the layout’s operating mode.

NOTE: In DC analog mode, your model will only start at a higher voltage than what you may accustomed to when
operating analog models. You will need to turn the throttle up for the model to start operating.

Function outputs in analog mode

It is possible to program the decoder so that function keys F0 - F12 (as they are assigned in the function mapping)
can also be activated in analog mode. To do this, CVs 13 & 14 must first be programmed with a DCC central control
unit. The corresponding values can be found in the CV table of the detailed operating instructions. The light function
F0 is factory-set to “on.”

Motorola®

The decoder utilizes 4 Motorola® addresses to access functions F1 - F 16, when using a Motorola—based
command station. The three sequence addresses for the functions F5 - F16 are ascending to the decoder address
and can be activated in CV61 as required by the values 1 (F5 - F8), 2 (F5 - F12), or 3 (F5 - F16).

Configuration of CVs

In addition to the decoder address, the indexed CVs of a locomotive decoder are the most important CVs. These are
the CVs 12 and 29 in the PIKO SmartDecoder XP 5.1. As a rule, an indexed CV contains various basic settings of
a decoder, such as reversing the direction of travel. CV calculation examples can be found in the detailed operating
instructions.

RailCom®, RailCom Plus®

In the decoder, CV29 (RailCom®) can be turned on or off via bit 3. If RailCom Plus® is turned on, the decoder
will be automatically recognized by a RailCom Plus®-enabled DCC control system (i.e. PIKO SmartControl) and
a locomotive icon, decoder name, and its special function icons will appear on the control system’s screen. With
RailCom Plus® technology, no locomotive data has to be stored in the DCC central control unit and no locomotive
addresses have to be programmed into the decoder.

mfx®

PIKO SmartDecoder XP 5.1 is specifically made for the mfx® data format. If your control system uses the mfx®
format, then the decoder is automatically recognized and is assigned its locomotive symbol, decoder address, and
its up to 16 special function symbols. With mfx® technology, no locomotive data has to be stored in the central
control unit and no locomotive addresses have to be programmed into the decoder.

Braking

The decoder understands the following braking methods:
Märklin® braking section (brakes with analog DC voltage)
DCC braking function
ABC (Automatic Brake Control) braking section
The decoder can stop the model with two adjustable braking distances that are accurate down to the centimeter.
More information on "braking behavior" can be found in the detailed operating instructions.

Function outputs

A comprehensive description of all options related to the function outputs can be found in the detailed operating instructions.

Simple and extended function mapping

Easy-to-use function mapping allows you to assign functions like lighting and other outputs to any key between
F0 – F12. Acceleration, braking delay, and switching (shunting) mode can be assigned to any function keys using
CVs 156 and 157.

Smoke generator control

A smoke generator can be connected to outputs A1 to A7 which are load-sensitive and react to the model’s speed.
Function key assignment is done using extended function mapping.

Electric coupler control

PIKO electric couplers are operated by tiny copper wire resistance wires which heat up when the decoder sends
current through them. The heat causes the wires to expand, causing the coupler hook to move to the uncoupled
position. The model can then back away from the car. With the appropriate decoder settings, function outputs A4
and A5 will automatically switch off after a user-adjustable time without having to press their function key.

Switching (shunting) scenario, remote coupling/uncoupling

If your layout has remote electric uncouplers installed, you can program the locomotive decoder to perform a
switching scenario like the following:
1) The locomotive runs in one direction for a certain distance.
2) The locomotive stops and reverses direction.
3) The locomotive uncouples and moves back from the uncoupled car for a certain distance.
4) The locomotive stops, and resumes switching..

Extended function mapping

Due to its complex nature, extended function mapping cannot easily be set by programming individual CVs. To
work with extended function mapping, you will need the PIKO SmartProgrammer device (#56415) and, if desired,
the PIKO SmartTester (#56416). Detailed information on extended function mapping is available in the instruction
manual.

Servo control

The decoder can control up to two servo motors via outputs A6, A7. Function key assignment is done exclusively via
extended function mapping.
The use of a servo with the decoder requires electronics expertise.
Further information can be found in the detailed operating instructions.

ATTENTION: Soldering on the decoder should only be carried out by experienced specialists with the appropriate tools.
Decoders damaged by improper handling will not be covered by the warranty.

Factory reset

To restore the decoder to its factory settings, program CV8 to a value of 8.

Programming

Configuration variables (CVs) form the basis of all the decoder’s settings. This decoder can be used with the PIKO
SmartControllight DCC system, the PIKO SmartControl DCC system, or any other DCC- and Motorola based systems.
For more information on programming options, please refer to the instruction manual.

56500
Nowy

Opis

Numer katalogowy
56500
Złącze dekodera
PluX22 22-pin
Komentarze (0)
Na razie nie dodano żadnej recenzji.

Klienci którzy zakupili ten produkt kupili również:

16 innych produktów w tej samej kategorii:

Korzystając z naszej strony wyrażasz zgodę na wykorzystywanie przez nas plików cookies. Możesz określić warunki przechowywania lub dostępu do plików cookies w Twojej przeglądarce. Akceptuj Więcej informacji Odrzuć