- Brak towaru, zapytaj o możliwość zamówienia
ZIMO STACO3A - Moduł podtrzymania napięcia StayAlive + 2x GoldCap 0,3 F 2,7 V, 4 x 12 mm
Polityka bezpieczeństwa
Zasady dostawy i zwrotów
StayAlive controller in miniature version, suitable (also in terms of dimensions) for MX- or MS-decoders (miniature decoders) of "category 1" (i.e. without provisions for energy storage connection) or of "restricted category 2" (e.g. only 1000 µF possible in direct connection, therefore need for better energy storage in the manner of "category 1"), for connecting (via wires) to the decoder pads or pins "comm. plus" and "GROUND" .
2 or 3 mini gold caps are connected to the StayAlive controller via wires; this provides spatially distributed accommodation for all parts (decoder, STACO, gold caps) - as opposed to a massive "power pack". The board transforms the voltage of the goldcaps (in total 5.4 or 8V - depending on whether 2 or 3 goldcaps; when fully charged, decreasing to approx. 2V over time) up to 10V, which is sufficient for the replacement supply of the decoder in case of wheel-track contact interruptions (for drive and sound without loss of volume) and does not cause any disturbances, e.g. in service mode.
1 x STACO3, for charging and controlled discharging of 2 or 3 Mini-Goldcaps, 10 x 7.3 x 2 mm
2 x Mini-Goldcap 0.3 F/2.7 V, 4 x 12 mm (diameter x length)
Producent ZIMO ELEKTRONIK GmbH Schönbrunner Straße 188 A - 1120 Wien Austria office@zimo.at +43 / 1 / 81 31 007-0